Features
•
Two part Polyurethane resin in hermetically-sealed plastic-film pouches,
protected in aluminium foil.
• Mixing is carried out in sealed conditions, transparent pack ensures
visibility. Clean – no need for skin contact but safety gloves are
provided.
• Clear mixing instructions on every pack.
• Controlled curing temperature designed to be compatible with PVC,
XLPE, EPR, polythene and PILC cables.
• Full health and safety labelling.
• Batch number and use-by date on every pack.
• Designed to meet requirements of BS 6910 and CENELEC HD623 S1.
Mixed properties
Packs designed to contain factory pre-arranged quantities of resin and
hardener
Specific gravity
1.40 Resin, 1.22 Hardener
(Density) g/ml
1.36 Mixed system
Colour
Cream (Standard)
Gel Time
20-30 minutes at 21°C for 200g mass
Peak Exotherm
54-75°C depending on volume and ambient temperature, in compliance with
BS 6910
Complete cure time
at 23°C – 24 hours
Shelf Life
at 80°C – 1 hour
Specification
24 months when stored 5 – 15°C, in compliance with BS 6910
Operating temperature
-40°C to + 100°C continuous, for cured product
Thermal
Conductivity
>0.4w/mK
Tensile
Strength
45 MPa
Electrical
Strength
20kV/mm
Health
and Safety
Each pack contains mixing instructions and carries health and safety warnings
in accordance with BS 6910.
HEALTH AND SAFETY (COSHH) Information Sheet available on request.
Transportation
No special labelling required for shipments by Air, Sea or Road (UN No.
2489, packing group III)
